Weight Bar ( - Proflex M9000 User Manual

M9000 Multi-Function Home Gym
Step 8
1. Run the lat bar cable (66) over pulley with collars (49 A), then place a pulley cover (50) on each side of
the pulley. Notes: The ball stopper of the cable should be at the front of the machine. • Cable (65) must
exit the pulley covers (50) through the opening. Attach the assembled pulley and cable to the mounting
on the end of the bridge tube (08) and secure using 1 bolt (27) and 1 nut (39).
2. Pull cable (66) towards the back of the machine through the upper opening in the main support tube (02)
and over pulley (48 B).
3. Pull cable (66) downwards and around pulley (48 C). Place the floating pulley bracket (20) over pulley
and secure it to the pulley using 1 bolt (26) and 1 nut (38).
4. Pull cable (66) upwards and around pulley (48 D). Attach this pulley to the bridge tube (08) bracket and
secure using 1 bolt (26) and 1 nut (38).
5. Pull cable (66) downwards, then place washer (36) over the bolt on the end of the cable and fully screw it
in to the top of the weight bar (19). Tighten the lock nut to secure the assembly.
E&OE ©2017 Proflex
06
C
15