Pull Unit ( - Proflex M9000 User Manual

M9000 Multi-Function Home Gym
Step 6
1. Attach 2 pull bar arms (69) to the pull unit (09) and secure using 4 bolts (81), 8 washers (34) and 4 nuts
(38).
2. Attach a handlebar (11) to a pull bar arm (69) and secure using 3 bolts (21) and 3 washers (33). Perform
the same to attach the handlebar (11) to the other pull bar arm (69)
3. Attach the pull unit (09) to the base frame (01). Ensure there are 2 metal bushings (31) on each side of
the pull unit tubes and on either side of the base frame (01), for a total of 6 bushings. Place the
assembled pull unit (19) over the base frame (01) so that all bushings are aligned, then insert the pull
unit pivot (19) through the bushings and secure using 2 nuts (39) and 2 washers (35).
E&OE ©2017 Proflex 13