Lower Pull Bar ( - Proflex M9000 User Manual

M9000 Multi-Function Home Gym
Step 10
1. Attach chain (59) to the bracket on the rear end of the base frame (01) using 1 bolt (26) and nut (38).
2. Pull cable (65) through the lower opening in the leg curl tube (07) and around the underside of pulley (48
H).
3. Pull cable (65) towards the back of the machine through the lower opening in the main support tube (02)
and around pulley (48 I) and then towards the front of the machine.
4. Pull cable (65) upwards and around pulley (48 J). Attach this pulley to the pull unit (09) bracket and
secure using 1 bolt (26) and 1 nut (38).
5. Pull cable (65) towards the back of the machine and around the underside of pulley (48 K).
6. Pull cable (65) upwards and around the top of pulley (48 L), then attach this pulley to the lower section of
the two-way pulley bracket (16) and secure using 1 bolt (26) and 1 nut (38).
7. Pull cable (65) downward and around the underside of pulley (48 M). Attach this pulley to the base frame
(01) bracket and secure using 1 bolt (26) and 1 nut (38).
8. Pull cable (65) upwards and around the top of pulley (48 N), then attach this pulley to the lower section
of the floating pulley bracket (20) and secure using 1 bolt (26) and 1 nut (38).
9. Pull cable (65) downward and connect it to the end of chain (59) using a chain hook (carabiner) (61).
Note: Hook the cable to a chain link that causes it to be taught.
10. Attach the lower pull bar (14) to the front end of cable (65) using chain (60) and 2 chain hooks
(carabiner) (61).
E&OE ©2017 Proflex 17