Introduction; About This Manual; Warnings And Cautions - SATO WS408DT Service Manual

1 Introduction

1.1 About This Manual

This service manual gives the information necessary for you to adjust and repair the WS4 DT printer. This
service manual is written only for SATO authorized service personnel. The information in this manual is
confidential to general users.
This service manual is used as an extension of the operator manual. For basic specification, Installation,
operation and configurations of the printer, refer to the operator manual of the WS4 DT printer.

1.2 Warnings and Cautions

Before doing maintenance, please notice the following:

Put the device in a safe place.

Please keep the device in a clean and dry area.
WARNING
When replace or install any parts, please check following:

Turn off power.

Disconnect the power cord of the AC Adapter.

Disconnect the USB cable.
CAUTION (
Static Discharge

The printer electronics are sensitive to static discharge.

Wear an anti-static wristband and attach it to the printer chassis.
CAUTION (
Replace Parts

Please do not wear jewelry.

Please do not get hands and parts wet.
)
)
1