Table of Contents
Advertisement
Communications
The Bluetooth name of the vehicle is dis‐
played in the Control Display.
5.
To perform additional steps on the mobile
phone, refer to the mobile phone operating
instructions: e.g., search for or connect the
Bluetooth device or a new device.
The Bluetooth name of the vehicle appears
on the mobile phone display.
6.
Select the Bluetooth name of the vehicle
on the mobile phone display.
7.
Enter and confirm the same passkey on
the mobile phone and via iDrive.
Or
Compare the control number on the Con‐
trol Display with the control number in the
display of the mobile phone. Confirm the
control number in the mobile phone and on
the Control Display.
"OK"
8.
Select the functions for which the mobile
phone is to be used.
9.
"OK"
The mobile phone is paired and will appear
at the top of the list of mobile phones.
Up to three mobile phones can be connected
with the vehicle at once.
If pairing was unsuccessful: What to do if..., re‐
fer to page 81.
Display of supported functions
Functions supported by the mobile phone are
shown as a symbol during pairing.
White Symbol: Function active.
Gray symbol: Function inactive.
Symbol Function
Telephone.
Telephone 2.
Audio source.
80
Telephone
Online Edition for Part no. 01 40 2 926 935 - X/13
Following the initial pairing
The mobile phone is paired with the vehicle
within a short period of time if the engine is
running or the ignition is switched on.
The phone book entries stored on the SIM
card or mobile phone are transmitted to the ve‐
hicle after detection, depending on the mobile
phone.
Specific settings may be necessary in some
mobile phones, e.g., authorization or a secure
connection; refer to the mobile phone operat‐
ing instructions.
Connecting a particular mobile phone
1.
"Settings"
2.
"Connections"
3.
"Bluetooth®"
4.
Select the mobile phone that is to be con‐
nected.
The functions assigned to the mobile phone
before unpairing are assigned to the mobile
phone when it is reconnected. If the mobile
phone is already connected, these functions
are deactivated.
Configuring mobile phones
Functions can be activated or deactivated for
paired and connected mobile phones.
1.
"Settings"
2.
"Connections"
3.
"Bluetooth®"
4.
Highlight the mobile phone to be config‐
ured.
5.
Open "Options".
6.
"Configure device"
7.
At least one function must be selected.
▷
"Telephone"
▷
"Telephone 2"
▷
"Audio"
8.
"OK"
Hide quick links:
Advertisement
Table of Contents
