Operating - thomann Stairville LED Pixel Rail Drive 640 User Manual

6

Operating

Operating mode Auto
Connect the device to the mains and switch it on with the main switch [Switch].
Automatic operation can only be activated when the unit is operating alone or as master in a
master / slave combination. This setting is only relevant if the device is not controlled via DMX,
ArtNet or KlingNet.
Press [MODE] and use the buttons [UP] and [DOWN] to select the 'Auto Mode' option. Confirm
with [ENTER], to open the 'Auto Mode' menu.
Here you can activate one of 30 available show programmes and set the programme speed.
Use the buttons [UP] and [DOWN] to select the desired option and confirm with [ENTER]. Adjust
the displayed value with [UP] and [DOWN] and press [ENTER] to confirm each new setting.
With [MODE] you return to the previous menu level.
LED Pixel Rail Drive 640
Operating
25