Installation And Starting Up - thomann Stairville LED Pixel Rail Drive 640 User Manual

Installation and starting up

4 Installation and starting up
14
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
The device has two lateral attachment lugs each with two slots for wall or ceiling mounting
(mounting hardware not included).
Make sure that the installation complies with the standards and rules that apply in your
country.
Connect the units to be controlled via suitable DMX or RJ45 data cable to the device. A max-
imum of 30 devices may be serially connected to each serial port.
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
controller