Setting The Gpib Address - ILX Lightwave FPM-8200 User Manual

R E M O T E O P E R A T I O N
3
C H A P T E R
Basic GPIB Concepts

Setting the GPIB Address

In LOCAL mode (REMOTE indicator OFF), press LOCAL/ADR to display the
GPIB address for about 3 seconds. While the GPIB address is displayed, you can
change it to any of 31 addresses from "- 00 --" to "- 30 -" by pressing UP or
DOWN. Extended GPIB addressing (beyond 30) is not implemented in the FPM-
8200.
25
01_10 FPM-8200
