Remote Operation - ILX Lightwave FPM-8200 User Manual

3
C H A P T E R
R O
EMOTE PERATION

GPIB (General Purpose Interface Bus) is the common name for ANSI/IEEE
Standard 488, an industry standard for interconnecting test instruments in a
system. Every operation that you can perform from your FPM-8200 front panel
can also be done remotely through the rear panel GPIB interface. In addition,
some features are available only through GPIB. For example, the DELAY
command automatically sets a delay time before the execution of further
commands.
Remote control can be useful for building an automated test system that includes
other instruments. It is also useful for structuring and collecting data for longer
tests, such as environmental and component burn-in tests.
The FPM-8200 can be completely and effectively controlled by any controller that
meets ANSI/IEEE-488 standards. This chapter explains GPIB concepts, system
setup, and command syntax. Chapter 4 is a reference guide of FPM-8200
responses to GPIB commands.
This chapter assumes:
• Your computer has an appropriate GPIB interface.
• You have a basic knowledge of GPIB programming for instrument control, or other
information sources for reference.
• You are familiar with the operating controls on the FPM-8200. (Chapter 2)
GPIB interface adaptors and support software for standard desktop PCs are
available from several manufacturers. Contact ILX Lightwave Customer Service
for more information.
21
FPM-8200
