Selecting The Recording Speed; Nicam (Sv-665B/Sv-661B/Sv-662B/Sv-661I Only) - Samsung SV-261I Instruction Manual

Selecting the Cassette Type
GB
(SV-665B/SV-661B/SV-662B/SV-661I)
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
END: MENU
(SV-265B/SV-261B/SV-262B/SV-261I)
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
END: MENU

Selecting the Recording Speed

Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
OK
SPEED DUB TV/VCR TIMER
22
If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding , or , buttons to select the
USER SET option.
3 Press the OK button to select this option.
4 Press the corresponding or buttons, until the
SELECT option is selected.
5
Press the or buttons as many times as required, until the
correct cassette length is displayed.
E180 E240
E 300 E260
6
Press MENU twice to exit the menu.
You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower quality
To record a cassette... Press the SPEED button on the
remote control, until...
In standard play mode SP is displayed.
In long play mode LP is displayed.
NICAM (SV-665B/SV-661B/SV-662B/SV-661I Only)
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
USER SET option.
TAPE
3
Press the OK button to select this option.
Result: The USER SET
4
Press the corresponding
is selected.
5 To...
Mono mode
NICAM mode
6
On completion, press MENU twice to exit the menu.
, or , buttons to select the
menu is displayed.
or buttons, until the NICAM option
Press or , until...
OFF is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo sound
is distorted due to inferior reception
conditions.
ON is displayed.
ON: Normally set at this position.
GB
PROG OPTIONS OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
OK END: MENU
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
END: MENU
23