Adjusting Picture Alignment Manually; Intelligent Picture Control - Samsung SV-261I Instruction Manual

Playing a Cassette
GB
2
3
REC MENU
Adjusting Picture Alignment Automatically
SV-662B/SV-661I/SV-265B/SV-261B/SV-262B/SV-261I Only)
A.TRK IPC INPUT
REPEAT
AUDIO DISPLAY
TRK PROG

Adjusting Picture Alignment Manually

(SV-661B/SV-662B/
SV-661I/SV-265B/
SV-261B/SV-262B/
(SV-665B) SV-261I)
VCR INPUT .TRK IPC
REPEAT
DISP./
IO
PROG/TRK TRK PROG
30
This function allows you to play back any pre-recorded cassette.
1 Switch on both the television and your VCR.
2 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ll.
Otherwise, the cassette is played automatically.
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3
To... Then press...
Stop the playback (STOP).
Eject the cassette (EJECT).
(SV-661B/
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
Result: The tracking bar appears.
The picture is automatically adjusted.
The tracking bar disappears when digital auto tracking has
been completed.
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the PROG/TRK ( or ) / TRK (
until the picture is clear and stable.
Result: The tracking bar appears.
The image is adjusted.
The tracking bar disappears when you release the button.

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1
During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding
option.
USER SET
3
Press the OK button to select this option.
Result: The
4 Press the corresponding
selected.
5
Press the button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is
of the image is adjusted automatically.
6
To adjust the sharpness manually, select Intelligent Picture
Control mode
OFF
7
Press the or
your preferences.
If you do not press a button within ten seconds, the
PICTURE
8
On completion, press the MENU button again.
Intelligent Picture Control
SV-661I/SV-265B/ SV-261B/SV-262B/SV-261I Only)
1 During playback, press the IPC button.
Result: The
2
Press the button to turn the IPC (Intelligent Picture Control)
option ON and OFF
When Intelligent Picture Control mode is
of the image is adjusted automatically.
3 To adjust the sharpness manually, press the
IPC mode OFF .
The horizontal picture adjusting appears.
4
Press the or
your preferences.
or ) buttons
If you do not press a button within ten seconds, the
PICTURE
5 On completion, press the IPC button again.
, or , buttons to select the
USER SET menu is displayed.
or buttons, until the IPC option is
ON , the sharpness
.
buttons until the picture is displayed according to
menu disappears automatically.
(SV-661B/SV-662B/
PICTURE menu is displayed.
.
ON , the sharpness
button to turn the
buttons until the picture is displayed according to
menu disappears automatically.
GB
(SV-665B/SV-661B/SV-662B/SV-661I)
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
END: MENU
(SV-265B/SV-261B/SV-262B/SV-261I)
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
END: MENU
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
1
AUDIO DISPLAY
TRK PROG
** PICTURE **
IPC : OFF
SOFTEN SHARPEN
*
-------- -----
ON/OFF:
31