Table of Contents
Advertisement
Presetting the Stations Automatically
GB
INSTALL
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
INSTALLATION
OK
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
END:
MENU
YOUR DATA WILL BE LOST
PRESS
OK
TO CONTINUE
MENU
TO EXIT
AUTO SET UP
PLEASE WAIT
2%
I--------------------I
END:MENU
18
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 14).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
Plug & Auto Set up (see page 14)
Automatically
Manually (see page 19)
You can store up to 80 stations.
1
Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
,
or ,
buttons to select the
option.
INSTALLATION
3
Press the OK button to select this option.
Result:
The
INSTALLATION
menu is displayed.
4
Press the corresponding
or
buttons, until the
UP
option is selected. And then press the
option.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
5
Press OK to start the auto scanning.
Result:
The
PLEASE WAIT
indication flashes on the
television screen.
The first frequency band is scanned and the first
station found is displayed and stored.
The VCR then searches for the second station and
so on.
When the automatic scanning procedure has
finished, the VCR switches automatically to pro-
gramme 1.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6
If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 16).
Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 20).
Presetting the Stations Manually
You do not need to preset the stations manually if you
have already set them automatically.
1
Press the MENU button on the remote control.
Result:
2
Press the corresponding
INSTALLATION
3
Press the OK button to select this option.
Result:
4
Press the corresponding
UP
option is selected.
5
Press the
Result:
6
Press the
required.
7
Press the button to preset the station.
Result:
8
Press the
Result:
AUTO SET
button to select this
9
Press the
The station name is set automatically from the broadcast signal.
10
To change the programme's name, press the button.
Result:
11
To...
Select a character
in the name
Move to the next or
previous character
12
If you...
Wish to store the
station displayed
Do not wish to
store the station
displayed
13
Repeat this procedure from Step
stations have been stored.
14
On completion, press the MENU button three times to exit the
menu.
The programming menu is displayed.
,
or ,
buttons to select the
option.
The
INSTALLATION
menu is displayed.
or
buttons, until the
MANUAL SET
button to select a
MANUAL SET UP
option.
The
TV STATION TABLE
menu is displayed.
or
buttons to select a programme number as
The
MANUAL TUNING
menu is displayed.
or
buttons to start scanning.
The frequency band is scanned and the first station
found is displayed.
or
buttons until the
is selected.
NAME
The first letter of the name flashes.
Then...
Press the
or
button until the
required character is displayed
(letters, numbers or "-" character).
Press the
or
buttons
respectively.
Then...
Press the corresponding
or
buttons,
until the
MFT
is selected.
Press the
or
buttons to adjust the
picture, if necessary.
Press OK to store the station
Press the corresponding
or
buttons,
until the
CH
is selected.
Press the
or
buttons to go on
scanning the frequency band and display
the next station
12
Go back to the beginning of Step
6
onwards, until all the required
GB
INSTALL
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
INSTALLATION
OK
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
END:
MENU
** TV STATION TABLE **
PR
CH
NAME
1
27
CAEB
2
--
----
3
--
----
4
--
----
5
--
----
SWAPPING:OK
DELETE:CLR/RST
MENU
** MANUAL TUNING **
PR
:
1
CH
: ---
MFT
:
-
NAME
: ----
MEMORY:
OK
END:
MENU
19
Hide quick links:
Advertisement
Table of Contents
