Input/Output Connectors - Sony DSR-1/1P Operating Instructions Manual

Location and Function of Parts

Input/Output Connectors

1 TC OUT connector
2 TC IN connector
3 GEN LOCK IN connector
4 AUDIO OUT CH-1/CH-2 connectors
1 TC OUT (time code output) connector (BNC)
This outputs time code signals from the built-in time
code generator. When a time code signal is input to the
TC IN connector 2, this output signal is synchronized
to it.
For details about time code, see "Setting Time Code Value"
on page 51.
14
Chapter 1 Overview
Rear
+48V ON
DC OUT
12V
LINE MIC LINE
DC IN
CH-1 AUDIO IN
Shoulder strap fitting
+48V ON
MIC
TALLY
CH-2
2 TC IN (time code input) connector (BNC)
Input an external signal for synchronizing the built-in
time code generator. Use an SMPTE (DSR-1) or EBU
(DSR-1P) time code signal.
Note
Use a jitterless LTC signal. Using an LTC signal
reproduced by other equipment may cause the DSR-1/
1P to malfunction.
5 Camera connector
6 S VIDEO OUT connector
7 VIDEO OUT connector
8 AUDIO IN CH-1/
CH-2 connectors and
input selection switches
9 EARPHONE connector