Condensation - Sony DSR-1/1P Operating Instructions Manual

Condensation

If you move the VCR suddenly from a very cold place
to a warm place, or use it in a very humid location,
condensation may form on the head drum. If the VCR
is operated in this state, the tape may adhere to the
drum, and cause a failure or even permanent damage.
Take the following steps to prevent this from
happening:
• Remove the cassette before moving the unit from a
very cold place to a warm place.
• Before inserting a cassette, turn the power on, and
check that the HUMID indication is not showing in
the display window. If it is showing, wait — do not
insert a cassette until the HUMID indication
disappears. You can save waiting time if you keep the
VCR powered.
For details of cassette insertion and removal, see the section
"Shooting" on page 38, and for details of the HUMID
indication, see the section "Warning System" on page 72.
73
Chapter 7 Maintenance