Lincoln Electric Air Vantage 600 Owner's Manual page 24

2.9.1 Clean debris and dust from the area around the manifold block
and the filter to prevent contamination.
2.9.2 Remove the filter by turning it counterclockwise using a
suitable filter wrench.
Check the filter to make sure that the threaded nipple did
not unscrew with the filter. If it is in the filter, remove it
carefully to avoid thread damage, clean the threads and
then coat the threads that go into manifold block with a
small amount of Loctite blue and install it into the
manifold block.
2.9.3 Check the gasket-sealing surface of the manifold block for
contamination, old gasket material or damage.
Make sure the new filter is a VMAC filter, part number
9200039. This oil filter is a high pressure oil filter, not an
automotive oil filter, which will rupture under high
pressure.
2.9.4 Apply a thin coating of compressor oil to the filter sealing
gasket.
2.9.5 Spin the filter onto the threaded nipple until the gasket contacts
the sealing surface of the manifold block.
22
VMAC – Vehicle Mounted Air Compressors
Toll Free: 1-888-241-2289 Local: 250-740-3200
Fax: 1-250-740-3201