Jet DSLT-770 Operating Instructions And Parts Manual

Double scissor lift table
Hide thumbs Also See for DSLT-770:

Advertisement

Quick Links

Operating Instructions and Parts Manual
DSLT-770 Double Scissor Lift Table
For serial no. 17020001 and higher
JET
427 New Sanford Road
LaVergne, Tennessee 37086
Part No. M-140778
Ph.: 800-274-6848
Revision C 03/2017
www.jettools.com
Copyright © 2017 JET

Advertisement

Table of Contents
loading

Summary of Contents for Jet DSLT-770

  • Page 1 Operating Instructions and Parts Manual DSLT-770 Double Scissor Lift Table For serial no. 17020001 and higher 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140778 Ph.: 800-274-6848 Revision C 03/2017 www.jettools.com Copyright © 2017 JET...
  • Page 2: Warranty And Service

    JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are given as general information and are not binding. JET reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason ®...
  • Page 3: Table Of Contents

    Maintenance ................................6 Troubleshooting DSLT-770 Double Scissor Lift ....................6 Replacement Parts ..............................6 Parts Breakdown for DSLT-770 Double Scissor Lift Table ................7 Parts List for DSLT-770 Double Scissor Lift Table .................... 8 IMPORTANT SAFETY INSTRUCTIONS Read and understand the owner’s manual before assembly and operation.
  • Page 4: Introduction

    If there are any questions or comments, please contact either your local supplier or JET. JET can also be reached at our web site: www.jettools.com.
  • Page 5: Assembly

    Assembly Attach the handle (A, Figure 1) to the frame using two hex cap bolts, two lock washers, and two flat washers. Tighten with a 19mm wrench. Note: The two rear casters can be locked so that they do not rotate. Press foot lever (B, Figure 1) Attach foot lever (A, Figure 2) to the lever bracket (B, Figure 2) with one hex cap screw,...
  • Page 6: Maintenance

    Number of your machine available when you call will allow us to serve you quickly and accurately. Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET. Some parts are shown for reference only, and may not be available individually.
  • Page 7: Parts Breakdown For Dslt-770 Double Scissor Lift Table

    Parts Breakdown for DSLT-770 Double Scissor Lift Table...
  • Page 8: Parts List For Dslt-770 Double Scissor Lift Table

    Parts List for DSLT-770 Double Scissor Lift Table Index No. Part No. Description Size 1 ....DSL770-01G ..... Table ......................1 2 ....DSL770-06 ....Link Shaft ....................... 2 3 ....DLS770-02 ....Link Assembly....................1 4 ....DSL770-03 ....C-Ring..............Ø 16 m ......8 5 ....
  • Page 9 Index No. Part No. Description Size [26] .... SB-5MM ....Steel Ball..............Ø 5 mm ......1 [27] .... SLT660F-36-25 ..Spring ......................1 [28] .... SLT660F-36-26 ..O-Ring* ..............Ø 10 x 1.9 mm ....1 [29] .... SLT660F-36-27 ..Adjusting Shaft ....................1 [30] ....
  • Page 10 Index No. Part No. Description Size 73 ....SLT660FH-78 .... Swivel Wheel Assembly (index # 20-25, 28, 31, 32) 1 ....DSL770-RK ....Repair Kit ....................... 1 Index numbers with brackets [ ] are part of the Hydraulic Pump Assembly, DSLT770H-35. Parts included in the Repair Kit are indicated by an asterisk *.
  • Page 11 This page intentionally left blank.
  • Page 12 427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.jettools.com...

Table of Contents