JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are given as general information and are not binding. JET reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason ®...
* without load The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring obligations.
Note: The two pivoting casters can be locked so that they do not rotate. Press foot lever (B, Figure 1 for SLT-1650) down to lock. Press foot lever (A, Figure 2 for SLT-660F) down to lock. Attach foot lever (A, Figure 3) to the lever bracket (B, Figure 3) with one hex cap bolt, one flat washer, one lock washer (C, Figure 3).
This allows the table to lower in a slow, when not in use. controllable manner. Before loading, always lock the caster brake. Folding Handle for SLT-660F Lower the table. Step on the rod that is located between the lower sections of the handle.
Number of your machine available when you call will allow us to serve you quickly and accurately. Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from JET. Some parts are shown for reference only, and may not be available individually.