15.19. At^setmode Switch Firmware Mode - Telit Wireless Solutions LN940A11 SERIES User Manual

AT^SLBAND?
^SLBAND: WCDMA,1,2,4,5,6,8,19
^SLBAND: LTE,1,2,3,4,8,18,19,21,26,28,41,66
OK

15.19. AT^SETMODE Switch Firmware Mode

AT^SETMODE command is used to switch firmware mode, you can switch firmware mode to normal,
extension or legacy mode.
Syntax
Type Command
Test Command AT^SETMODE=?
Write Command AT^SETMODE=<value>
Read Command AT^SETMODE?
Parameter Description
parameter
< value >
Example
AT^SETMODE=?
^SETMODE: (0, 1, 2)
OK
AT^SETMODE=0
OK
80591ST10886A Rev.2
Possible Return Result
^SETMODE: (0, 1, 2)
OK
^SETMODE: 0
^SETMODE:1
^SETMODE:2
Value
0
1
2
Page 178 of 200
Instruction
Normal mode
Extension mode
Legacy mode
Normal mode
Instruction
Normal mode
Extension mode
Legacy mode
2018-07-02