System Overview; Before Installing The Adaptor; Parts Identifi Cation - Panasonic CZ-TACG1 User Manual

System Overview

CAUTION
Do not stand on an unstable surface when operating

or checking the adaptor.
- This can cause injury from falls.
Indoor unit
Network adaptor
Wireless LAN
CZ-TACG1

Before Installing the Adaptor

• Requires a Smartphone that is iOS/Android compatible;
• The Network adaptor (adaptor) is designed specifi cally as a terminal for the
"Panasonic Comfort Cloud";
• Do not attach the adaptor to metal as wireless performance will be adversely
affected;
• The adaptor recommended to be installed outside of the indoor unit. (It needs to
be accessed when connecting it or when there is a problem.);
• The Wireless LAN network coverage must include the air conditioner installation
location;
• Do connect the Wireless LAN to a compatible Panasonic Air Conditioner with a
connectivity interface port.
Specifi cation
Input Voltage DC 12V (From air conditioner indoor unit)
Power consumption Max: 660 mW
Size 66 mm (H) x 36 mm (W) x 12 mm (D)
Weight Approx. 85g
Interface 1x Wireless LAN
Wireless LAN standard IEEE 802.11 b/g/n
Frequency range 2.4 GHz band
Encryption WPA2-PSK (TKIP/AES)
Router
Internet
Parts Identifi cation
5
4
3
2
No Item
1 Power LED
2 Link LED
3 Status LED
4 Setup Switch*
5 Check Switch*
6 Reset*
* The device factory reset can be done by press and hold CHECK and SETUP
button for 10 seconds. After release the CHECK and SETUP button, press the
reset button.
4
6
1
Description
Indicates that the adaptor is being supplied with
power.
Indicate the communication status of adaptor to
the server.
Indicate the communication status of adaptor to
the air-conditional.
Green: status without weekly timer
Orange: status with weekly timer
Red: Abnormality
Red  Orange  Green :
Auto updating
adaptor fi rmware
During signal strength checking:-
Strong: 
Medium: 
Weak: 
No signal: 
Connection setup mode switching
Signal strength checking (press and hold for 5
seconds then release)
Disable LEDs display (press and hold for 10
seconds then release)
Soft reset