Set Supervisor/User Password - Aaeon PCM-6892 Rev.B Manual

C o m p a c t B o a r d

3.13 Set Supervisor/User Password

You can set either SUPERVISOR or USER PASSWORD, or both of
them. The difference between the two is that the supervisor password
allows unrestricted access to enter and change the options of the setup
menus, while the user password only allows entry to the program, but
not modify options.
To abort the process at any time, press Esc.
In the Security Option item in the BIOS Features Setup screen, select
System or Setup:
System
Setup
NOTE: To clear the password, simply press Enter when asked to enter a
password. Then the password function is disabled.
Chapter3 Award BIOS Setup
Enter a password each time the system boots and when-
ever you enter Setup.
Enter a password whenever you enter Setup.
P C M - 6 8 9 2 R e v . B
3 - 17