IKEA SMAKSAK User Manual page 13

Hide thumbs Also See for SMAKSAK:
Table of Contents

Advertisement

ENGLISH
Heating
function
This function is designed to
save energy during cooking.
For the cooking instructions
Eco Fan
refer to "Hints and tips"
Cooking
chapter, Eco Fan Cooking.
The oven door should be
closed during cooking so that
the function is not interrupted
and to ensure that the oven
operates with the highest en-
ergy efficiency possible.
When you use this function,
the temperature in the cavity
may differ from the set tem-
perature. The residual heat is
used.The heating power may
be reduced. For general en-
ergy saving recommenda-
tions refer to "Energy Effi-
ciency" chapter, Energy Sav-
ing.This function was used to
comply with the energy effi-
ciency class according to EN
60350-1. When you use this
function the lamp automati-
cally turns off after 30 sec-
onds.
To turn on the pyrolytic
cleaning of the oven. This
function burns off residual dirt
Pyrolysis
in the oven.
Setting a heating function
1. Turn the knob for the heating functions
to select a heating function.
2. Turn the control knob to select the
temperature. Press
The lamp turns on when the oven operates.
3. To turn off the oven, turn the knobs to
the off position.
Application
to confirm.
Turn the control knob to change the
temperature during cooking. Turn the knob
for the heating function to change a heating
function during cooking and press
confirm.
Setting the function: Direct Steam
This function allows to improve humidity
during the cooking.
Warning! Risk of burns and
damage to the appliance.
Released humidity can cause burns:
• Do not open the oven door when the
function operates.
• Open the oven door with care after the
function stops.
Refer to "Hints and tips" chapter.
1. Fill the cavity embossment with tap
water.
The maximum capacity of the cavity
embossment is 250 ml.
Fill the cavity embossment with water
only when the oven is cold.
Caution! Do not refill the
cavity embossment with
water during cooking or
when the oven is hot.
2. Put food in the oven and close the oven
door.
3. Set the function: Direct Steam
4. Turn the control knob to select a
temperature. Press the
5. To turn off the oven, turn the knobs to
the off position.
13
to
.
to confirm.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents