Setting The Drc (Dynamic Range Compression) - Samsung HT-XQ100 Instruction Manual

Page 54
Test Tone
speaker connections.
Press Cursor Press Cursor
2 3
button to move to to move to 'TEST
'Audio' and then TONE' and then press
press ENTER button. ENTER button.
•
The test tone will be sent to L
R SR
If the ENTER button is pressed again
at this time, the test tone will stop.
MOVE ENTER EXIT
MOVE
rn to the previous level.
e setup screen.
TEST TONEbutton on the remote.
L: Front Speaker (L) C: Center Speaker
R: Front Speaker (R) SL: Rear Speaker (L)
in Stop mode.
Multi-Channel Pro Logic Mode
correctly
Start
Setting the DRC
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
button
C
SL SW in order.
ENTER RETURN EXIT
STOP EXIT
SW: Subwoofer
SR: Rear Speaker (R)
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
(Dynamic Range Compression)
Press Cursor
1 2
In Stop or no disc
button to move to
mode, press
'Audio' and then
MENU button.
press ENTER
button.
MOVE ENTER EXIT MOVE
Press Cursor
3 4
Press Cursor
button to move to
,
'DRC' and then
the 'DRC'.
press ENTER
button.
•
When the Cursor
the effect is greater, and when the
Cursor button is pressed, the effect is
smaller.
MOVE ENTER RETURN EXIT CHANGE
ENG
ENTER EXIT
to adjust
button is pressed,
RETURN EXIT
56