Page 62
Radio
2
Tune in to the
desired station.
Automatic Tuning 1
When
is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
Automatic Tuning 2
automatically search for active
broadcasting stations.
Manual Tuning
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
2
Select a broadcast
station.
Press the STOP ( )
Automatic Tuning 1
button to select
PRESET and then press
button to select the preset station.
Press the STOP ( )
Automatic Tuning 2
button to select "MANUAL"
and then press and hold
button to automatically search the band.
Press STOP ( ) to select
Manual Tuning
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
s MO/ST button to listen in Mono/Stereo.
applies only when listening to an FM station.)
h time the button is pressed, the sound switches between "STEREO" and "MONO".
poor reception area, select MONO for a clear, interference-free broadcast.
Presetting Stations
Example: Presetting FM 89.1 in the memory
Press the TUNER
1
2
Press TUNING/CH
button and select the
to select "89.10".
FM band.
•
Refer to Step 2 on page 63 to
automatically or manually tune in
to a station.
Press
Press the TUNER
4
5
to select preset
MEMORY button
number.
again.
•
•
You can select between 1 and
Press the TUNER MEMORY button before
'number' disappears from the display.
15 presets.
•
'number' disappears from the display and
the station is stored in memory.
Note
•
This unit does not receive
AM broadcasts.
To tune in to a preset station, press
remote control to select a channel.
ENG
3
Press the TUNER
MEMORY button.
•
"1" flashes in the display.
To preset another
6
station, repeat
steps 2 to 5.
on the
64