Setting The Drc (Dynamic Range Compression) - Samsung HT-Q9 Instruction Manual

e 52
est Tone
aker connections.
Press Cursor but- Press Cursor
2 3
ton to move to 'Audio' to move to 'TEST
and then press TONE' and then press
ENTER button. ENTER button.
•
The test tone will be sent to L
R SR
If the ENTER button is pressed again
at this time, the test tone will stop.
MOVE ENTER EXIT
MOVE
to the previous level.
setup screen.
ST TONE button on the remote.
L: Front Speaker (L) C: Center Speaker
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
Stop mode.
Multi-Channel Pro Logic Mode
rrectly con-
Start
All manuals and user guides at all-guides.com
Setting the DRC
This feature balances the range between the loudest and quietist sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
button
C
SL SW in order.
ENTER RETURN EXIT
STOP EXIT
SW: Subwoofer
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
(Dynamic Range Compression)
Press Cursor
1 2
In Stop or no disc
button to move to
mode, press
'Audio' and then
MENU button.
press ENTER
button.
MOVE ENTER EXIT MOVE
Press Cursor
3 4
Press Cursor
button to move to
'DRC' and then
the 'DRC'.
press ENTER
button.
•
When the Cursor
the effect is greater, and when the
Cursor
smaller.
MOVE ENTER RETURN EXIT CHANGE
GB
ENTER
EXIT
, to adjust
button is pressed,
button is pressed, the effect is
RETURN EXIT
48