Connecting The Fm Antenna - Samsung HT-XQ100 Instruction Manual

age 22
xternal Components
Digital / Analog Component
as a Set-Top Box or CD Recorder.
as a VCR.
Audio Cable
(not supplied)
If the external analog compo-
nent has only one Audio Out,
connect either left or right.
CAL) to the Digital Output on the external digital component.
Home Theater to Audio Out on the external analog component.
ol to select 'DIGITAL IN / AUX' input.
selection changes as follows: D.IN AUX
tton on the main unit.
D.IN AUX USB FM
utput jack on your VCR to the TV, and connect the Audio
is product.

Connecting the FM Antenna

FM Antenna (supplied)
1
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
2
Slowly move the antenna wire around until you find a location where reception is good, then
fasten it to a wall or other rigid surface.
The cooling fan supplies cool air to the unit to prevent overheating.
Cooling Fan
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
•
This unit does not receive AM broadcasts.
Notes
ENG
20