Table of Contents
Advertisement
10
www.simpson.com.au
3.4 Program Options Compatibility
Program
Whites
Colours
Quick 15
Daily 60
Delicates
Wool
Bedding
Energy Saver
1) Vapour option can be combined with temperature 40°C to 90°C only.
3.5 Options
Temperature Touchpad
Press this touchpad repeatedly to
increase or decrease the wash tempera-
ture if you want your laundry to be
washed at a temperature different from
the one proposed by the washing
machine.
Spin Selection Touchpad
Press this touchpad repeatedly to
increase or decrease the spin speed or
select Rinse Hold, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine.
Maximum speeds are:
Program
Whites
Colours
Daily 60
Delicates
Energy Saver
Wool
Quick 15
Bedding
Quick Soak Rinse &
Vapour
1)
Spin Speed
1200 rpm
1000 rpm
800 rpm
Option
Drain &
Spin
Spin
-
No Spin
No spin option eliminates all the spin
phases and increase the number of
rinses.
-
Rinse & Hold
By selecting this option, the water of
the last rinse is not emptied out and
the drum turns regularly to prevent the
laundry creases.
The door is still locked to indicate that
the water must be emptied out.
The door stays locked with the
water in the drum. To continue
the cycle, you must press
(Start/Pause).
Extra
Delay End
Rinse
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SWF8025DQWA and is the answer not in the manual?
Questions and answers
Where is the lint filter??
Ezi Set inverter SWF8025DQWA Softener not getting to clothes The filler compartment is clean and water inlet and pressure is ok
The Simpson Ezi Set Inverter SWF8025DQWA softener may not be reaching the clothes due to the following reasons:
1. Blocked Dispenser – The detergent/softener dispenser may be clogged, preventing the softener from dispensing properly.
2. Incorrect Use – Ensure the softener is placed in the correct compartment of the dispenser.
3. Water Flow Issues – Low water pressure or a blocked inlet hose may prevent proper dispensing.
4. Overloading – Overloading the machine can obstruct the softener from evenly reaching clothes.
5. Incorrect Wash Program – Some programs may not use softener; verify the selected program allows softener use.
6. Faulty Dispenser Mechanism – If the dispenser drawer is damaged or not operating correctly, the softener may not be released.
Check and clean the dispenser, ensure proper loading, and verify the selected program to resolve the issue.
This answer is automatically generated
Temp & Spin together is not functioning. E40 appears. Need the Temp to appear on the touchpad. Help Help
The Temp & Spin function may not be working because the child lock is activated. When this function is enabled, pressing any touchpad will cause the lock symbol to flash on the display along with a buzzer sound. To deactivate the child lock and restore functionality, press the “Temp” and “Spin” touchpads at the same time until the unlock symbol appears on the display with a sound. This function remains enabled even after the appliance is switched off, so it must be manually deactivated.
This answer is automatically generated
How to remove door seal for cleaning