Safety instructions
Safety instructions
Please follow these safety instructions closely to prevent accidents and
material losses.
Safety instructions explained
Danger
This symbol warns against the
risk of injury.
!
Please note
This symbol warns against the
risk of material losses and envi-
ronmental pollution.
Note
Details identified by the word "Note"
contain additional information.
Target group
These instructions are exclusively
intended for qualified contractors.
■ Work on gas installations must only
be carried out by a registered gas fit-
ter.
■ Work on electrical equipment must
only be carried out by a qualified
electrician.
■ The system must be commissioned
by the system installer or a qualified
person authorised by the installer.
Regulations to be observed
■ National installation regulations
■ Statutory regulations for the preven-
tion of accidents
■ Statutory regulations for environmen-
tal protection
2
■ Codes of practice of the relevant
trade associations
■ All current safety regulations as
defined by DIN, EN, DVGW, TRGI,
TRF, VDE and all locally applicable
standards
a ÖNORM, EN, ÖVGW-TR Gas,
ÖVGW-TRF and ÖVE
c SEV, SUVA, SVGW, SVTI,
SWKI, VKF and EKAS guideline
1942: LPG, part 2
Safety instructions for working on
the system
Working on the system
■ Where gas is used as the fuel, close
the main gas shut-off valve and safe-
guard it against unintentional reopen-
ing.
■ Isolate the system from the power
supply, e.g. by removing the separate
fuse or by means of a mains isolator,
and check that it is no longer 'live'.
■ Safeguard the system against recon-
nection.
Danger
Hot surfaces can cause burns.
■ Before maintenance and serv-
ice work, switch OFF the
appliance and let it cool down.
■ Never touch hot surfaces on
the boiler, burner, flue system
or pipework.