Set Technician Code - Kit-Lock KL1000 Programming And Operating Instructions

•
Step 1 – Enter 4 digit code Close the locker which will now be locked.
Step 2 – Enter the same 4 digit code
SET B﴿ PUBLIC USE – DOUBLE CODE ENTRY
• ••
#Master Code 22
• ••
Example: #11335577 22
Result: The lock will now remain open until the next user enters their own personal code into the lock as follows:
•
Step 1 – Enter 4 digit code Repeat 4 digit code
Close the locker which will now be locked.
Step 2 – Enter the same 4 digit code
Note: When locked in this mode

SET TECHNICIAN CODE

• •
#Master Code 99 Technician Code
• •
Example: #11335577 99 555555
Result: The lock is automatically set into B﴿ Public Use Function and allows the programmed Technician Code to open the lock WITHOUT the entered single User
Code being erased.
Note: If lock is opened with a Master Code the User Code will be erased.
POI‐KL1000‐v5:1017
© 2018 Codelocks Ltd. All rights reserved.
Keywords: Lock Locks Kit Kitlock Kitlocker Locker Program Programming Instruction Instruct Help Support Troubleshoot Troubleshooting Sequence
Sequences Install Installation Parameters Settings Setting KL KL1000 1000 2017
••
the lock will now open and remain open until next 4 digit code is entered.
••
••
the lock will now open and remain open until next 4 digit code is entered as Step 1.
•
LED will flash every 5 seconds to indicate the locker is locked.
• ••
Technician Code
• ••
555555