Page 1
KL1000 - 2017 Programming and Operating Instructions Views: 495 Codes - The Basics • The KitLock has four code levels available: i﴿ Master Code ii﴿ Sub‐Master Code iii﴿ User Code iv﴿ Technician Code • The KitLock is supplied with two factory set codes:...
Page 2
MASTER CODE The Master Code can: Open the lock Change the Master Code Set / Change / Delete the Sub‐Master and User Code Select between Private and Public Functions Activate/deactivate Technician Code SUB‐MASTER CODE The Sub‐Master Code can: Open the lock Change the Sub‐Master Set / Change / Delete / the User Code USER CODE The User Code can:...
Page 3
BATTERY FAILURE OVERRIDE The KitLock has been designed so an external PP3 battery can be placed against the contact points surrounding the Blue and Red LED’s so the lock can be opened to replace the batteries should they fail. The procedure is as follows: Place the contact points of the PP3 battery against the contact points surrounding the Blue and Red LED’s.
Page 4
SET OR CHANGE THE USER CODE • • •• #Master Code 02 User Code • • •• Example: #11335577 02 9999 Result: New User Code 9999 now operative. DELETE USER CODE • •• #Master Code 03 • •• Example: #11335577 03 Result: User Code deleted. SET OR CHANGE THE SUB‐MASTER CODE •...
Page 6
KL1000 - 2017 Installation Instructions Views: 96 Special Notes Please read carefully: • Before installing the lock, load the batteries and familiarise yourself with the operation and programming. • The handle will not turn until you enter the factory default Master Code 11335577 or the User Code 2244.