PizzaMaster PM 721 Owner's Manual page 9

25. Use these hex bolts to place the legs,
follow the next steps. (Continue at step
26)
2
1
26. Use 3 bolts M10x30 and 1 washer per
bolt 20x10.5 (provided). Rotate the leg
180° out to place the inside bolt first,
29. Make sure that all the legs are firmly
and well adjusted
Support Assembling
Continue here for all models
1
3
1
27. Let the bolt loose and rotate the leg
180°
30. DO NOT remove the pallet truck/
genie lift before placing the leg cut-
outs
PizzaMaster®
Installation – Assembly oven
28. Tighten the bolts alternately for better
fit. Hand tight all first
31. Fit all four shelf slide rails in place
in the leg cut-outs
2
3
9