PizzaMaster PM 721 Owner's Manual page 6

Installation – Assembly oven
1. The oven is packed safely and for
easy transportation. Do not drop it or
allow hard knocks
4. Remove wooden stone supports from
top deck. Remove legs (carefully) and
accesories from inside. Replace the
wooden stone supports
6. If the oven has a Steam System,
place "wooden blocks" to lay the oven
down in a higher position
6
Unpack and prepare
2. Cut the packing bands and remove
the top and side cardboards
Steps for 1 to 2 decks ovens
For 1 or 2 Decks Ovens Follow
Steps 5 to 15
7. Turn the oven back side down, make
sure that the stones have not moved
PizzaMaster®
3. DO NOT carry the oven by the door
handle and do not remove the wooden
stone supports until the oven is installed
5. Place a pallet behind the oven
8. Use a pallet jack/ pallet truck to
transport the oven in this position to
pass through doors or narrow areas