PizzaMaster PM 721 Owner's Manual page 12

Installation – Assembly oven
Important!
Do not remove the wooden sup-
ports for the hearthstones until
you reach point 5 opposite.
Do not use the oven-door han-
dles or the oven-vent knobs to lift
the oven, this might damage the
oven.
12
Assembly For Ovens With Spacers
Tip! If possible, use a forklift truck to
lift the oven to fit the spacers . Alter-
natively, lift the oven manually on to
a strong table or flat bench, so that
the legs can be fitted safely.
Minimum lift height for fitting of
legs:
1-deck oven
2-deck oven
3-deck oven
4-deck oven
5-deck oven
PizzaMaster®
Lift the oven and fit the spacers
using the M10x30 bolts (12 pcs) +
20x10.5 washers (12 pcs) provid-
ed. For each spacer, first screw in
(but do not tighten) the bolts. When
all bolts are in place, tighten bolts
progressively and alternately to fix
the spacer firmly to the oven.
125mm / 5in
125mm / 5in
Warning!
125mm / 5in
Make sure all 12 bolts for assem-
125mm / 5in
bly the legs on to the oven are in
125mm / 5in
place and proper tightened, before
moving the oven.