How To Read The Kinetic Wave Display; The Comfort-Level Icons; Remote Sensor Scanning - Oregon Scientific BAR122HGN User Manual

HOW TO READ THE KINETIC WAVE
DISPLAY
The kinetic wave display shows the signal receiving status of the
main unit. There are three possible forms:
The unit is in searching mode.
Transmission data are securely
registered.
No signal received in search mode.

REMOTE SENSOR SCANNING

The unit can be set to automatically scan and display readings from
the remote sensors and indoor readings. When the remote-sensor
mode is active, the display will show the readings from one channel
for about 4-second and then proceed to the next channel display.
To activate the remote-sensor scanning mode:
• Press and hold [CHANNEL] for 2-seconds.
To deactivate the remote-sensor scanning mode:
• Press either [CHANNEL], [MEMORY], [HI/LO], [
The comfort level indicators COMFORT, WET or DRY will tell you
if the curent environment is comfortable, too wet or too dry.
The comfort indicator will appear on the display when the follow-
ing conditions are satisfied:
Indicator
displays
on the unit
COMFORT
Indicator
], [ON/OFF]
(TEMP % RH AL)
7

THE COMFORT-LEVEL ICONS

Temperature Humidity
Range
Range
20°C to 25°C 40%RH-
(68°F to 77°F) 70%RH
-5°C -+ 50°C OVER-
(23°F - 122°F) 70%RH
WET
-5°C -+ 50°C
Below
(23°F - 122°F)
40%RH
DRY
Less than
40%RH
No 20°C( 68°F)
to
or More than
70%RH
25°C (77°F)
Shows that the
Current
Environment
Ideal range for
both relative
humidity and
temperature
Contains excess
moisture.
Contains
inadequate
moisture
No comment