Oregon Scientific BAR122HGN User Manual page 15

Trouble Possible Cause
The added Remote Selected Channel is
sensor is not read by already used by another
main unit Remote sensor
(1) The measurement
Displayed Temperature
method is different
and/or humidity data
are different from other
(2) The area under
measuring instruments
evaluation is different or
being influenced by
climate
The weather forecast icon Batteries of the Main Unit
are being discharged
never changes
Comfort level icon is not Temperature and humidity
displayed are out of valid range
- Clock time is not The clock radio signal is not
correctly set; and/or received because:
- Electromagnetic interfer
- Reception icon
ence exist, or the Main
"Antenna" displays
Unit is located within re
as "No reception"
inforced concrete wall or
shadowed area location
- Orientation of placement
is not at optimum posi
tion for reception of clock
radio signal
Remedy
Select another free channel via
the Channel switch. Then reset
the Remote Sensor and activate
SEARCH mode in the Main
Unit
(1) Use the same instruments
with consideration of the
tolerance of readings
(2) Place the 2 instruments
very closely for a time
period (no less then 30
minutes), avoiding direct
light and air movements
Replace with mew batteries
Please refer to User's Manual
- Locate the Main Unit far from
PC, mobile phone etc and
re-locate it near the window
sill. Wait at least 24 hours
(note: during night-time sig
nal is less attenuate particu
larly after raining)
- The clock radio signal is
searched at 1:00, 2:00,
3:00, 9:00, 15:00, 21:00
every day automatically
- To force the signal reception
please refer to instructions
in the User's manual
15