Subscribe to Our Youtube Channel
Related Manuals for Clarke CMSSR
Summary of Contents for Clarke CMSSR
- Page 1 MITRE SAW STAND WITH ROLLERS MODEL NO: CMSSR PART NO: 6500975 ASSEMBLY INSTRUCTIONS LS0718 - ISS 2 ORIGINAL INSTRUCTIONS...
-
Page 2: Safety Precautions
INTRODUCTION Thank you for selecting this Clarke mitre saw stand with rollers. Read this manual before use, the warnings and cautions in this manual will help you use the mitre saw stand safely. GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. - Page 3 ASSEMBLY 1. Screw the handle onto the table using the screws provided. 2. Slide in the extension arms and secure from below using the knob supplied. 3. Insert the rollers into the extension arms and secure in place using the knob supplied. OPENING/CLOSING THE MITRE SAW STAND 1.
- Page 4 ADJUSTING THE MITRE SAW STAND ADJUSTING THE LEG HEIGHT 1. Press the locking pin shown and pull the leg to the desired height. • The locking pin must lock into one of the holes on the leg. • Make sure that the same hole is used on each leg.
Need help?
Do you have a question about the CMSSR and is the answer not in the manual?
Questions and answers