Bay Networks BayStack 400-ST1 Installation Manual page 6

If any items are missing or damaged, contact the sales
agent or the customer service representative from whom
you purchased the BayStack 400-ST1 cascade module.
You will need a Phillips screwdriver for the installation.
Note:
"switch" and "unit" are used interchangeably in
this guide.
BayStack 400-ST1 Front Panel Components
The front-panel components of the BayStack 400-ST1
Cascade Module are shown in
descriptions follow the figure.
Cascade A Out
2
1 = Blank connectors (unused)
2 = Cascade A Out connector
3 = Unit Select switch
4 = Cascade A In connector
Figure 2.
Unless otherwise specified, the terms
1
Unit Select
Base
3
Front Panel Components
Figure 2. Component
Cascade A In
BS0031A
4
4