Table of Contents
Advertisement
3.
After the BayStack 450 boot code image is
downloaded, click on Version 1.1.0 at the BayStack
450 agent link.
Follow the prompts to download the BayStack 450
agent image. The agent image filename is
b4501102.img
Be sure to download the BayStack 450 boot code image
first, then download the BayStack 450 agent image.
Accessing the Latest Documentation
If you are upgrading your BayStack 450 switches, be sure
to obtain the latest version of the Using the BayStack 450
10/100/1000 Series Switch guide. This guide provides
instructions for setting up your stack configuration after
you install the 400-ST1 Cascade Modules.
You can obtain the latest updates to your product
documentation, including release notes, by visiting the
Bay Networks Web site at the following location:
www.support.baynetworks.com/library/tpubs
Upgrade Restrictions
The following restrictions apply when upgrading the
switch firmware:
•
The firmware cannot be upgraded through a port that
is configured for tagged traffic.
37
Advertisement
Table of Contents
