Remote On/Off: Setting The Nash To Accept/Ignore The Ir Remote On/Off Command; Bluetooth; Enabling/Disabling The Bluetooth; Le Receiver - M2TECH NASH User Manual

M2Tech
NASH
MC/MM PHONO PREAMPLIFIER
REVISION P A – JUNE 2018
R www.m2tech.biz
NASH
Option 1 and 3 also apply when the power mode switch is set to "A" and the
was previously powered by pushing the front panel button (Fig.1, 1) and then put in
standby using the "ON/OFF" key on the remote control or the "ON/OFF" button in the app.
7.2.9. REMOTE ON/OFF: Setting the NASH to Accept/Ignore the IR Remote
ON/OFF command
When the NASH is used together with the VAN DER GRAAF M II, the power mode switch is set
K
to "B" and the power mode is set to "enable", it may be desirable to inhibit the on/off
command from the IR remote control, as the VAN DER GRAAF M II will receive and execute
K
the on/off command from the remote instead.
This way, pushing the on/off key on the remote will instruct the VAN DER GRAAF M II to
K
enable/disable its outputs to power the NASH and other attached M2Tech units on/off in the
programmed order. Please read the VAN DER GRAAF M II user manual for details.
K
SETUP
REMOTE POWER
REMOTE POWER REMOTE POWER
ENABLE DISABLE
® ®

7.2.10. BLUETOOTH

: Enabling/Disabling the Bluetooth

LE Receiver

®
User may choose to enable or disable the Bluetooth Low Energy interface.
This can be done accessing this menu feature.
Copyright © 2018, M2Tech Srl
22