HP EliteBook Folio 1040-G1 User Manual page 65

4.
When prompted, type a password.
5.
When prompted, type the new password again to confirm.
6. To save your changes and exit Computer Setup, click the Save icon and then follow the on-screen
instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Changing a BIOS administrator password
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2. Press f10
3. Use a pointing device or the arrow keys to select Security > Change Password, and then
press enter.
4.
When prompted, type your current password.
5.
When prompted, type your new password again to confirm.
6. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
Deleting a BIOS administrator password
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press f10
3. Use a pointing device or the arrow keys to select Security > Change Password, and then
press enter.
4.
When prompted, type your current password.
5.
When prompted for the new password, leave the field empty, and then press enter.
6. Read the warning. To continue, select YES.
7.
When prompted to type your new password again, leave the field empty, and then press enter.
8. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
ENWW
to enter Computer Setup.
to enter Computer Setup.
esc while the "Press the ESC key for Startup Menu"
esc while the "Press the ESC key for Startup Menu"
Using passwords
55