Nvidia DGX-2 SYSTEM User Manual page 50

7.3.2 Creating a Bootable USB Flash Drive by Using
Akeo Rufus
On a Windows system, you can use the
create a bootable USB flash drive that contains the DGX-2 software image.
Ensure that the following prerequisites are met:
The correct DGX-2 software image is saved to your local disk. For more information,

see Obtaining the DGX-2 Software ISO Image and Checksum
The USB flash drive has a capacity of at least 4 GB.

Plug the USB flash drive into one of the USB ports of your Windows system.
1.
Download and launch the
2.
Under Boot selection, click SELECT and then locate and select the ISO image.
3.
Under Partition scheme, select GPT.
4.
Under File system, select FAT32.
5.
Click Start. Because the image is a hybrid ISO file, you are prompted to select
6.
whether to write the image in ISO Image (file copy) mode or DD Image (disk image)
DGX-2 System User Guide
Akeo Reliable USB Formatting Utility (Rufus)
Akeo Reliable USB Formatting Utility
Restoring the DGX-2 Software Image
File.
(Rufus).
to
50