Creating A Bootable Installation Medium - Nvidia DGX-2 SYSTEM User Manual

RAID. See the section
more information.
Press Enter.
d)
The DGX-2 System will reboot from ISO image and proceed to install the image.
This can take approximately 15 minutes.

Note: The Mellanox InfiniBand driver installation may take up to 10 minutes.
After the installation is completed, the system ejects the virtual CD and then reboots into
the OS.
Refer to Setting Up the DGX-2 System
System for the first time after a fresh installation.
CREATING A BOOTABLE INSTALLATION
MEDIUM
After obtaining an ISO file that contains the software image from NVIDIA Enterprise
Support, create a bootable installation medium, such as a USB flash drive or DVD-ROM,
that contains the image.

Note: If you are restoring the software image remotely through the BMC, you do not
need a bootable installation medium and you can omit this task.
If you are creating a bootable USB flash drive, follow the instructions for the platform

that you are using:
On a text-only Linux distribution, see
●
the dd Command .
On Windows, see
●
If you are creating a bootable DVD-ROM, you can use any of the methods described

in Burning the ISO on to a DVD
DGX-2 System User Guide
Retaining the RAID Partition While Installing the OS
for the steps to take when booting up the DGX-2
Creating a Bootable USB Flash Drive by Using
Creating a Bootable USB Flash Drive by Using Akeo Rufus
on the Ubuntu Community Help Wiki.
Restoring the DGX-2 Software Image
.
for
48