Table of Contents
Advertisement
TIMER OPERATION (Weekly timer)
Instructions relating to heating are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
To change the selected time settings
* Press the START/STOP button to stop the air conditioner, and then proceed as follows.
1
1
Perform steps
(P. 3)
Select the day to edit.
3
Change the time set-
ting.
6
Press the TEMP./DAY button to select another day
and repeat steps
To change selected operation mode and set temperature
* Press the START/STOP button to stop the air conditioner, and then proceed as follows.
1
1
Perform steps
(P. 3)
Select the day to edit.
3
4
* If the settings are
complete, proceed
to step
7
Press the TEMP./DAY button to select another day
and repeat steps
To set the DAY OFF (For information concerning the DAY OFF function, refer to p. 7, "OPERATING TIPS.")
* Press the START/STOP button to stop the air conditioner, and then proceed as follows.
1
Select
.
3
to
in "To set the WEEKLY timer."
4
2
5
to
to set the another day.
3
to
in "To set the WEEKLY timer."
5
8
.
2
5
to
to set the another day.
2
Select the number that corresponds to
the selected day indicated by a code
from 1 to 7.
2
Select the time to change. (The selected setting starts flash-
ing.)
* If the settings are
complete, proceed
7
to step
.
7
Press for 3 seconds.
("WEEKLY" flashes for 3 seconds and then the clock dis-
play reappears.)
2
(The day display changes to the set temperature display.)
Change the operation mode.
Change the set temperature.
Press the SET button
twice.
8
Press for 3 seconds.
("WEEKLY" flashes for 3 seconds and then the clock dis-
play reappears.)
En-5
5
2
Repeat steps
change "WEEKLY 2" settings.
* If the settings are complete,
proceed to step
6
2
4
Repeat steps
to
"WEEKLY 2" settings.
* If the settings are complete,
8
proceed to step
3
(The "DAY OFF" caption appears on
the display.)
Stop the "DAY OFF" setting by press-
ing the DAY OFF button again.
4
to
to
7
.
to change
.
Advertisement
Table of Contents
