Potential Equalization Connector; Wall (Ceiling) Vesa Mounting The Display - GE 1926A-1AN Technical Manual

5. Potential Equalization Connector

Display is equipped with an equipotential connector.
Equipotential cable

6. Wall (Ceiling) VESA mounting the display.

If you intend to mount the display on the wall (ceiling), we strongly recommend that you use only
UL approved wall (ceiling) mount kits with attached M4*12 mm screws that can hold more than
the display weight, and that you ensure it is securely and safely installed. (VESA mounting for
75 mm x 75 mm and 100 mm x 100mm).
If you use a non-UL approved wall (ceiling) mount kit, there is a safety risk that the display
may fall from the wall (ceiling) due to an improper attachment through the use of wrong length
screws. Refer to GE manuals CARESCAPE monitors' user's manual and supplemental
information manual and to the CARESCAPE Modular Monitors Mounting Solutions for more
information on approved mounting solutions and hazards associated with improper mounting.
Note:
All units are shipped with pre attached 75 mm x 75 mm VESA Plate.
18