Icom IC-F5120D series Operating Manual page 14

3
IDAS OPERATION
Transmitting a call (continued)
■
D Transmitting a Call Alert
Call Alert allows you to alert another user, who may be away
from their transceiver, whom you want to talk to.
q Push [Digital Button] to enter the application selection
mode.
• "VOICE" appears.
• To change to the desired call type, hold down [Digital Button] for
1 second while in standby. After changing, the transceiver auto-
matically enters the application selection mode.
w Push [CH Up] or [CH Down] to select "CALLALRT."
e Push [Digital Button] again to enter the Individual or Talk-
group ID selection mode.
• The preprogrammed ID name is displayed.
• When an ID name is not programmed, the ID code is displayed.
• The primary ID can be preset to display first.
r Push [CH Up] or [CH Down] to select the desired ID name
(or ID code).
Individual or Talkgroup ID name is displayed.
11
t Hold down [PTT] to transmit the Call Alert to the selected
station or Talkgroup.
• "CA CALL" is displayed.
y Release [PTT].
• After receiving an acknowledgement from the targeted station,
"CA OK" is displayed.
• If the targeted station does not receive the signal or send back
an acknowledgement, "CA FAIL" is displayed.
u After a specified time period has passed, the transceiver
will return to receive.