Icom IC-F5120D series Operating Manual page 10

3
IDAS OPERATION
Receiving a call (continued)
■
D Receiving a Remote Monitor, Radio Check
or Status Polling Call
If an Individual call with a Remote monitor, Radio Check or
Status polling command is received, the transceiver will au-
tomatically transmit. (RAN code matching may not be neces-
sary, depending on the preprogramming.)
➥ When a Remote monitor command is received:
• The microphone audio is automatically transmitted for the set
time period.
➥ When a Radio Check command is received:
• An acknowledgement call is automatically transmitted.
➥ When a Status polling command is received:
• A status call is automatically transmitted.
7
D Receiving an Emergency call
q When an emergency call is received:
• Beeps sound.
• "STAT EMR" and the calling station ID name (or code) alternately
appear.
• The state of the backlight depends on the Backlight setting in
the User Set mode. When "LIGT AUT" is selected, the backlight
turns ON for the preprogrammed time period. (Auto Backlight
Timer)
The calling station
ID name
w To clear the beep, ID and message display, turn OFF the
power or change the channel.