Toshiba MMW-AP0481CHQ-E Installation Manual page 29

<RBC-AMS55E-ES/EN>
Field setting menu(1/2)
1.Test mode
2.Register service info.
3.Alarm history
4.Monitor function
5.Setting louver position
Return
Set
Item
1. Test mode Settings for when performing the test operation after installation
Registration of information about the contact number for service, model name and
2. Register service info
serial number of the indoor unit and outdoor unit
3. Alarm history List of latest 10 alarm data: information of check code, date, time, and unit
Monitoring data of sensor temperature, rotating speed of the compressor or other
4. Monitor function
factor.
5. Setting louver position Change the louver indication setting to match the indoor unit type.
Set whether or not the operation mode can be selected when setting the schedule
6. Setting timer operation mode
timer.
7. DN setting Advanced settings using DN code
8. Reset power consumption data Resetting the power consumption data saved in the remote controller.
55-EN
1
Push the [ MENU ] button to display the
menu screen.
2
Push and hold the [ MENU ] button and
∨
the [ ] button at the same time to
display the "Field setting menu".
Push and hold the buttons for more than 4
seconds.
3
Push the [ CANCEL ] button to return.
Function
Perform the advanced settings for the air conditioner.
Carry out the setting operation while the indoor unit is stopped. (Turn off the air conditioning unit before starting the
setting operation.)
DN setting
Code
(DN) Data
10 0000
Return Fix
< >
DN setting
Code
(DN) Data
10 0001
Return Fix
< >
DN setting
Continue?
Return
Yes No
– 28 –
1
∧ ∨
Push the [ ] / [ ] button to
select "7. DN setting" on the "Field setting
menu" screen, then push the "
Set
Set" [ F2 ] button.
The fan and louver of the indoor unit operate.
When the group control is used, the fan and
louver of the selected indoor unit operate.
Move the cursor to select "Code(DN)" with the
< " [
" F1] button, then set
<
∧ ∨
"Code(DN)" with the [ ] / [ ]
button.
Move the cursor to select "Data" with the
> " [
" F2 ] button, then set "Data"
>
∧ ∨
with the [ ] / [ ] button.
2
Refer to the Installation Manual supplied
with the indoor unit or service manual for
details about the Code(DN) and Data.
3
Push the [ MENU ] button to set the other
Code(DN) and Data. After "Continue?" is
displayed on the screen, push the
" Yes" [ F1 ] button.
Yes
4
Push the " No" [ F2 ] button to
No
finish the setting operation. " Setting"
appears on the screen for a while, then the
screen returns to the "Field setting menu"
screen.
Pushing the " No" [ F2 ] button
No
displays the unit selection screen when the
group control is used. Push the [ CANCEL]
button on the unit selection screen to finish the
setting operation. " Setting" appears on the
screen for a while, then the screen returns to the
"Field setting menu" screen.
56-EN