IAG -ENG-7252 Installation Manual page 9

11. Using pop clip pliers remove the two pop clips that
hold the breather pipe to the intake manifold.
12. Using hose clamp pliers or needle nose pliers loosen
the spring hose clamp on the breather pipe as shown.
Then loosen the spring clamp that holds the breather to
the inlet pipe. Finally remove the breather pipe from the
engine retaining clip and remove the breather pipe from
the engine.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com 9