Advertisement
51. Before proceeding, please look over the check list
below:
C heck Over List
U
Are all coolant fittings tight?
Are (2) coolant clamps correctly fitted on the turbo coolant
pipe and the expansion tank?
Was any coolant spilled in the engine bay cleaned up?
Are the hose clamps on the silicone couplers tight?
Are the following connections zip tied:
•
½" valve cover ports
•
Both connections on the Y-fitting that is attached
to the block
•
All 3 side ports on the AOS
•
The top breather port
52. After you have reviewed the check list, proceed to start
the vehicle and check for leaks. After the engine has heat
cycled, you can check the coolant level and replace any
coolant that was lost during installation.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
36
Advertisement
