Advertisement
43. Locate the ½" breather hose and route it to the middle
AOS can port. Secure the hose to the can with a zip tie.
Next secure the ½" breather hose to the small AC line at
the fire wall. Make sure the line is free of kinks and is not
obstructed. Trim the excess off the zip ties.
44. Reinstall the OEM EGR pipe and gasket using the (4)
OEM 12mm bolts. Torque is 14ft. / lbs. *Make sure before
installing the EGR pipe that the OEM O-ring is in place on
the intake manifold.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
31
Advertisement
