Advertisement
30. Clock the upper breather fitting so that is matches the
picture. Locate the (2) supplied 4mm x 6 allen bolts and
using a 3mm allen wrench thread the bolts thru the
breather fitting into the AOS and secure the port fitting.
31. Using a 10mm socket and ratchet remove the (x2)
10mm nuts securing the wiring harness bracket. Unclip the
harness from the bracket and remove the bracket from the
vehicle. Next unclip the harness from the brake line
bracket.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
22
Advertisement
